By Mark Norfolk on Wednesday, July 27th, 2022
Fabrisonic’s patented low-temperature Ultrasonic Additive Manufacturing (UAM) process utilizes ultrasonic welding to 3D print metal parts. Although our process does not use powders, we have lots of friends in industry that use powder based processes. Read “Not ALL 3D Printers Use Powder” for a more in depth break down of the difference between UAM and powder bed fusion. One of the biggest complaints we hear from our powder brethren is consternation around build plates:
During one such conversation with our colleagues at EWI, he stated, “How can we measure the loads going through the build plate?” Since Fabrisonic was working currently on embedding strain sensors in aerospace parts, we suggested that we 3D print a build plate with embedded sensors. And thus began the journey to build a ‘smart baseplate’ or ‘smart build plate’.
Fabrisonic teamed with EWI (PBF research) and Luna Innovations (Fiber Optic Sensors) to design and build an instrumented PBF build plate for the Defense Logistics Agency (DLA) under a Phase I STTR. Fabrisonic used its solid-state 3D process to print a plate with a single embedded fiber optic sensor. The fiber optic was embedded with a specific undulating pattern that allows resolving the strain across the entire build plate. The team put the smart baseplate in EWI’s PBF machine and attempted a build that included ‘problematic’ features. From this initial build the team found that the device picked up significantly more information than just bulk stress state:
The video above shows true strain-time plots resolved in the x-y plane (left) and the raw data along the length of the fiber (right). These colorful strain-time histories easily communicate what is happening in the build. However, further data slicing can provide a deep understanding of the quality of the build:
Figure 1 – As a crack forms and propagates it is normal to see a transverse compression to form at the point of separation (left). Strain vector changes also highlight certain flaws (right).
Based on the preliminary results, the team feels that this approach could be used to monitor quality during PBF builds:
Fabrisonic continues to evolve the concept of the Smart Baseplate with additions of a variety of sensors including thermocouples and vibration sensors. The team recently upgraded an EOS M290 for further investigations for quality monitoring.